Simple Dryer Repair Tips You can Do
A clothes dryer is a wonderful convenience when it is working
properly. A dryer with problems increases the workload and frustration of the person
in charge of the household laundry. Loading up several baskets of wet clothes and driving to a laundermat is an
inconvenience at the least. If this appliance does not produce enough heat to dry the clothes completely, takes
too long, overheats or has a bad odor, a simple problem to check for may be an air flow obstruction.
Any restriction in the airflow to or from the dryer will
cause problems in the drying cycle. The electric dryer is programmed to start drying when the drying cycle is
selected, the door is shut and the button is pushed to start. If the lack of heat occurs in all cycles, the
airflow is the first item to be checked. Extended drying time is also a sign of insufficient
Likewise, if a dryer
overheats, the problem could be the same issue. The lint
filter is checked and cleaned first; this may solve the problem. Lint filters should be cleaned often; many
people do this at the end of each load so they do not forget. Hot, warm moist air that cannot dissipate will
become stale and rancid creating an unpleasant odor. A buildup of lint in the dryer or dryer vent is a safety
issue and a fire danger. This can start a fire which could spread to the whole house.
The first step in checking for a blockage is to check the
amount of exhaust air at the outside vent while the dryer is operating. There should be a strong breeze
indicating good airflow. If this flow is weak, the lint trap should be checked and cleaned. If this solves the
issue, the dryer repairman or woman can take a bow and go back to work.
If the trap is clean, the next area to check is the vent
hose which connects the dryer to the exterior vent. This hose will need to be removed and cleaned. This piece
should be as straight as possible without any bends or kinks to provide easy flow. Once this unit is cleaned or
verified to be clean, the vents on both ends need to be viewed, cleaned and assessed for
If this does not solve the problem, more intensive repair
efforts will need to be initiated. Due to the time and the research this would require, the problem should
probably be turned over to a professional. These professionals have the experience and knowledge to diagnose and
repair problems quickly.
Article Source: http://EzineArticles.com/?expert=Tony_Hodgison